The Chlorine gas from the cylinder enters the primary chlorine gas filter and secondary chlorine gas filter where it is filtered to remove any foreign material which might be present.

The gas passes through the primary filter and secondary filter and dosage control valve and enter to the rotameter and mixing chamber through glass non return valve. Water comes through the water filter where it is filtered to remove any foreign material which might be present and water enter to the mixing chamber where the chlorine gas is thoroughly mixed and dissolved in the water and carried to the application point as a solution. The control valve is provided with s diaphragm operated back check valve to ensure that chlorine gas not leak back into the regulator when the system is shut down. You can regulate the rate of flow of chlorine gas through control valve slowly.

Components exposed to dry gas under pressure are chlorine resistant Teflon, special grade rigid PVC, Borosilicate Glass, Silver and Hastalloy-C, Hastalloy-C Spring are used in the construction of the chlorinator.

Also available when required, are alarm devices, pressure reducing valves, gas manifolds, booster pumps, and solution change over valves, gas masks, residual chlorine testing sets, Ammonia and electrically operated valves.

The apparatus is guaranteed against all inherent manufacturing defects for a period of two years from the date of dispatch. This does not apply into the case of mis-handling or serious neglect whilst on site, nor to items not of our manufacturers, which are subject to the guarantee in force by the manufacturers